HONDA GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES
2. Disconnect the battery cables as instructed. See WARNING "To avoid unintentionally starting..." in
General Warning, Section 1, Page 1-2.
3. Raise the hood.
4. Remove the passenger-side seat. See Seat Removal, Section 4, Page 4-9.
5. Disconnect the Z-shaped end (1) on the accelerator cable from the pedal (Figure 13b-12,
Page 13b-17).
6. Release the retention clip at the pedal bracket (Figure 13b-13, Page 13b-17).
7. Disconnect the accelerator cable (5) from the engine (Figure 13b-14, Page 13b-17).
7.1. Remove the governor guard. See Governor Guard Removal on page 13b-19.
7.2. Remove the cable strain relief (1) from the transmission governor bracket (2).
7.3. Disconnect the accelerator cable spring (3) from the transmission governor arm (4).
Figure 13b-12 Z-Shaped Cable End
(Gasoline Vehicles)
7
Figure 13b-14 Governor Arm (Gasoline Vehicles)
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
1
5
1
2
10
3
4
Figure 13b-13 Accelerator Cable Pedal Bracket
(Gasoline Vehicles)
13B
Engine Control Linkages
Page 13b-17