Club Car 2007 Carryall 295 Maintenance And Service Manual page 427

HONDA GASOLINE ENGINE, MUFFLER, FUEL SYSTEM, AND CLUTCHES
SPRING COMPRESSION
BASE (CCI P/N 102603501)
Figure 13b-34 Driven Clutch Service Tools
1. Place the driven clutch onto the Spring compression base (CCI P/N 102603501) (Figure 13b-34,
Page 13b-37).
2. Place the Spring compression collar (CCI P/N 102605201) onto the driven clutch.
3. Thread the Spring compression nut (CCI P/N 102606101) down onto the threaded post enough to
release the pressure on the snap ring.
4. Use snap-ring pliers to remove the snap ring (1) (Figure 13b-35, Page 13b-38).
5. Slowly remove the spring compression nut. The collar will then rise and release tension on the spring (3).
6. Remove the cup (2) and spring (3).
7. Remove the moveable sheave (4) from the fixed sheave (5). See following NOTE.
NOTE: Both the moveable and fixed sheaves have spacers (6). Be sure to retain the spacers for reassem-
bly of the driven clutch.
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
SPRING COMPRESSION
NUT (CCI P/N 102606101)
SPRING COMPRESSION
COLLAR
(CCI P/N 102605201)
DRIVEN
CLUTCH
13B
Clutches
Page 13b-37