Club Car 2007 Carryall 295 Maintenance And Service Manual page 473

DRIVETRAIN COMPONENTS
Figure 14-8 Roll Pin in Driveshaft and Pinion Shaft
9. Disconnect the electric clutch harness from the differential at the connector behind the splash guard
(Figure 14-10, Page 14-5). See following NOTE.
NOTE: It may be necessary to open one or two splash guard fasteners to access the connector.
10. Remove the four flange-head bolts from the frame support weldments (Figure 14-11, Page 14-5). See
following NOTE.
NOTE: Do not remove the flange-head bolts from the differential plate and differential housing.
11. Pull the front differential and differential plate forward and out of the driveshaft. Tip the unit downward and
remove it from the vehicle. See following NOTE.
NOTE: It is not necessary to remove the differential from its mounting plate to repair or service the unit.
Figure 14-10 Differential Clutch Connector
2007 Carryall 295/295 SE & XRT 1550/1550 SE Gasoline, Diesel and IntelliTach M & S Manual
Figure 14-9 Differential Vent Tube
Remove These Bolts
Figure 14-11 Front Differential Plate
14
Front Differential
Page 14-5