Swingarm Related Parts Inspection - Suzuki GSX-R600 Manual

2C-12 Rear Suspension:
– Tighten the swingarm pivot lock-nut (4) to the
specified torque with the special tool.
Special tool
(B): 09940–14940 (Swingarm pivot thrust
adjuster socket wrench)
Tightening torque
Swingarm pivot lock-nut (c): 90 N·m (9.0 kgf-
m, 65.0 lb-ft)
4
(c)
• Tighten the cushion lever, cushion rod and rear shock
absorber mounting bolts and nuts to the specified
torque.
Tightening torque
Rear shock absorber upper mounting nut (d): 50
N·m (5.0 kgf-m, 36.0 lb-ft)
Rear shock absorber lower mounting nut (e): 50
N·m (5.0 kgf-m, 36.0 lb-ft)
Cushion lever mounting bolt (f): 98 N·m (9.8 kgf-
m, 71.0 lb-ft)
Cushion rod rear mounting nut (g): 78 N·m (7.8
kgf-m, 56.5 lb-ft)
(d)
(f)
(g)
(B)
I837H1230042-01
I837H1230043-03
(e)
I837H1230044-04

Swingarm Related Parts Inspection

Refer to "Swingarm Removal and Installation (Page 2C-
10)".
Spacers
1) Remove the spacers from the swingarm.
2) Inspect the spacers for wear and damage. If any
defects are found, replace the spacers with new
ones.
Chain Buffer
Inspect the chain buffer for wear and damage. If any
defect is found, replace the chain buffer with a new one.
Plate
Inspect the plate for damage and excessive bend. If any
defect is found, replace the plate with a new one.
B837H12306012
I837H1230045-01
I837H1230046-01
I837H1230047-01