4A-6 Brake Control System and Diagnosis:
8) Fill the reservoir with brake fluid to the upper mark of
the reservoir.
9) Install the reservoir cap.
Rear Brake
Bleed air from the rear brake system as the same
manner of front brake.
• Remove the reservoir tank mounting bolt (1).
• Remove the reservoir cap (2) and diaphragm.
I837H1410007-01
1
I837H1410008-01
2
I837H1410009-01
• Fill the reservoir with brake fluid to the upper mark of
the reservoir. Place the reservoir cap to prevent dirt
from entering.
NOTE
The only difference of bleeding operation
from the front brake is that the rear master
cylinder is actuated by a pedal.
Tightening torque
Air bleeder valve (Rear): 7.5 N·m (0.75 kgf-m, 5.5
lb-ft)
I837H1410052-01
I837H1410010-01
I837H1410011-01