Suzuki GSX-R600 Manual page 99

Step
1 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to "Fuel Tank
Removal and Installation in Section 1G (Page 1G-9)".
3) Remove the air cleaner box. Refer to "Air Cleaner Box
Removal and Installation in Section 1D (Page 1D-7)".
4) Check the CMP sensor coupler (1) for loose or poor
contacts.
If OK, remove the CMP sensor. Refer to "CMP Sensor
Removal and Installation in Section 1C (Page 1C-2)".
Action
1
I837H1110008-01
Engine General Information and Diagnosis:
Yes
• B/Y, R or B/Br wire
open or shorted to
ground.
• Loose or poor
contacts on the CMP
sensor coupler or
ECM coupler
(Terminal "7", "8" or
"35").
• If wires and
connection are OK,
intermittent trouble or
faulty ECM.
• Recheck each
terminal and wire
harness for open
circuit and poor
connection.
• Replace the ECM
with a known good
one, and inspect it
again.
1A-31
No
• Inspect that metal
particles or foreign
material stuck on the
CMP sensor and
camshaft tip.
• If there are no metal
particles and foreign
material, then replace
the CMP sensor with
a new one.