Specifications; Service Data - Suzuki GSX-R600 Manual

1E-14 Engine Lubrication System:
3) Remove the oil pump drive sprocket (3) and chain
(4).
4) Remove the thrust washer (5).
3
Installation
Installation is in the reverse order of removal. Pay
attention to the following points:
• Install the thrust washer (1) to the countershaft.
NOTE
The chamfer side "A" of thrust washer
should face the crankcase side.

Service Data

Oil Pump
Item
Oil pressure (at 60 °C, 140 °F)
Oil
Item
Engine oil type
Engine oil capacity
5
4
I837H1150042-01
"A"
1
I837H1150043-01

Specifications

SAE 10W-40, API SF/SG or SH/SJ with JASO MA
Change
Filter change
Overhaul
• Install the oil pump drive sprocket (2) to the
countershaft.
NOTE
Teeth "B" on the sprocket must face the
clutch side.
• Pass the chain (3) between the oil pump drive and
driven sprockets.
• Apply engine oil to the countershaft.
• Install the bearing (4) and spacer (5), and apply
engine oil to them.
• Install the clutch assembly. Refer to "Clutch
Installation in Section 5C (Page 5C-7)".
Standard
100 – 400 kPa
(1.0 – 4.0 kgf/cm 2 , 14 – 57 psi)
at 3 000 r/min
Specification
2 200 ml (2.3/1.9 US/lmp qt)
2 500 ml (2.6/2.2 US/lmp qt)
2 900 ml (3.1/2.6 US/lmp qt)
"B"
2
3
4
5
I837H1150044-02
I837H1150045-01
B837H11507001
Limit
—
Note