Suzuki GSX-R600 Manual page 295

Water Jacket Plug
• Apply engine coolant to the O-rings of the water jacket
plugs.
• Tighten each plug to the specified torque.
CAUTION
!
Replace the O-rings with new ones.
Tightening torque
Water jacket plug (a): 9.5 N·m (0.95 kgf-m, 6.9 lb-
ft)
(a)
Oil Gallery Plug
• Tighten each plugs (for lower crankcase) to the
specified torque.
CAUTION
!
Replace the gaskets with new ones.
Tightening torque
Oil gallery plug (M12) (a): 15 N·m (1.5 kgf-m, 11.0
lb-ft)
Oil gallery plug (M16) (b): 35 N·m (3.5 kgf-m, 25.5
lb-ft)
(a)
(a)
I837H1140122-01
(b)
I837H1140123-01
• Apply thread lock to the oil gallery plug (for upper
crankcase) and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Oil gallery plug (c): 7 N·m (0.7 kgf-m, 5.0 lb-ft)
Oil Jet
• Apply thread lock to the oil gallery jet (1) (for
generator) and tighten it to the specified torque.
NOTE
After tightening the jet, make sure that the jet
end is flush with the cover mating surface.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Oil gallery jet (a): 27 N·m (2.7 kgf-m, 19.5 lb-ft)
1
Engine Mechanical:
(c)
I837H1140124-02
(a)
I837H1140125-02
1D-55