Suzuki GSX-R600 Manual page 220

1B-8 Emission Control Devices:
6) Disconnect the CMP sensor coupler (2) and remove
the cylinder head cover shield (3).
2
1
7) Remove the radiator mounting bolts.
8) Move the radiator forward.
9) Remove the front engine cover (4).
10) Disconnect the horn couplers (5) and remove the
horn (6).
6
3
1
I837H1120004-02
I837H1120005-01
I837H1120006-01
4
5
I837H1120007-02
11) Remove the cylinder head cover. Refer to "Engine
Top Side Disassembly in Section 1D (Page 1D-25)".
12) Remove the PAIR reed valves (7) with the gaskets.
13) Remove the PAIR reed valve (8).
Installation
Install the PAIR reed valve in the reverse order of
removal. Pay attention to the following points:
• Install the PAIR reed valves (1) along with the new
gaskets.
CAUTION
!
Replace the gaskets with new ones.
NOTE
Fit the projection "A" of the gaskets to the
depression of the camshaft holders.
"A"
7
I837H1120008-01
8
I837H1120009-01
"A"
1
I837H1120010-01