Cushion Lever Bearing Removal And Installation - Suzuki GSX-R600 Manual

Cushion Lever Bearing Removal and
Installation
Removal
1) Remove the cushion lever. Refer to "Cushion Lever
Removal and Installation (Page 2C-6)".
2) Remove the cushion lever bearings with the special
tool.
Special tool
(A): 09921–20240 (Bearing remover set)
B837H12306010
(A)
I837H1230017-01
(A)
I837H1230018-01
(A)
I837H1230019-01
Installation
CAUTION
!
The removed bearings must be replaced with
new ones.
1) Press the bearings into the cushion lever at 1 mm
(0.04 in) depth "A" and 0.5 mm (0.02 in) depth "B"
from the cushion laver surface with the special tool
and suitable size socket wrench.
NOTE
When installing the bearing, stamped mark
on the bearing must face outside.
Special tool
(A): 09924–84521 (Bearing installer set)
"B"
(A)
Rear Suspension: 2C-7
"A"
(A)
I837H1230021-01
"B"
(A)
I837H1230020-01