Suzuki GSX-R600 Manual page 279

10) Remove the thermostat (11).
11) Remove the thermostat connector (12).
12
12) Remove the oil jet (13).
13
13) Remove the intake pipes (14).
14) Remove the oil gallery plug (15).
15) Remove the cam chain tension adjuster service cap
(16).
15
11
I837H1140044-01
I837H1140045-01
14
I837H1140046-01
16
I837H1140047-01
Assembly
Assembly is in the reverse order of disassembly. Pay
attention to the following points:
• Tighten the cam chain tension adjuster service cap (1)
and oil gallery plug (2) to the specified torque.
CAUTION
!
Replace the gaskets with new ones.
Tightening torque
Cam chain tension adjuster service cap (a): 23
N·m (2.3 kgf-m, 16.5 lb-ft)
Oil gallery plug (Cylinder head) (b): 10 N·m (1.0
kgf-m, 7.0 lb-ft)
1
(a)
• Apply grease to O-rings of the intake pipes.
CAUTION
!
Replace the O-rings with new one.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Install the intake pipes.
Engine Mechanical: 1D-39
2
(b)
I837H1140048-01
I837H1140049-01