Suzuki GSX-R600 Manual page 272

1D-32 Engine Mechanical:
• Rotate the crankshaft (some turns) and recheck the
valve timing.
CAUTION
!
• Make sure that the adjuster works properly
by checking no slack at point "C".
• Do not turn the adjuster body until the
outer circlip "A" exceeds the groove "B".
If the inner circlip "C" is caught in the
groove "B", plunger may not go out
automatically from the adjuster body even
if pushing force is applied on the head.
In such case, it needs to be disassembled.
"A"
5
I837H1140275-03
"A"
5
I837H1140308-02
"C"
I837H1140232-07
NOTE
The cam chain tension adjuster can be
serviced with the engine installed in the
frame.
• Tighten the cam chain tension adjuster service cap (6)
to the specified torque.
CAUTION
!
Use a new gasket to prevent oil leakage.
Tightening torque
Cam chain tension adjuster service cap (b): 23
N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the valve timing inspection cap (7) to the
specified torque.
CAUTION
!
Use a new O-ring to prevent oil leakage.
Tightening torque
Valve timing inspection cap (c): 11 N·m (1.1 kgf-
m, 8.0 lb-ft)
7
Cylinder Head Cover
• Check and adjust the valve clearance. Refer to "Valve
Clearance Inspection and Adjustment in Section 0B
(Page 0B-4)".
• Pour engine oil in each oil pocket in the cylinder head.
6
(b)
(c)
I837H1140233-03
I837H1140234-01