Suzuki GSX-R600 Manual page 270

1D-30 Engine Mechanical:
• Apply engine oil to journals and cam faces.
• Install the dowel pins.
• Install O-rings (3) to the camshaft journal holders.
CAUTION
!
Replace the O-rings with new ones.
• Apply engine oil to journals.
3
• Install the camshaft journal holders.
NOTE
• Each camshaft journal holder is identified
with an embossed letter.
• Check that embossed letter on each holder
faces exhaust side.
Embossed letter
I837H1140223-02
• Install the can chain guide No. 2 (4).
• Fasten the camshaft journal holders evenly by
tightening the camshaft journal holder bolts lightly, in
the ascending order of numbers.
NOTE
• Damage to head or camshaft journal
I837H1140224-01
• Fit the copper washer to the camshaft
• The ascending order of numbers are
• Tighten the camshaft journal holder bolts in ascending
order of numbers to the specified torque.
Tightening torque
Camshaft journal holder bolt: 10 N·m (1.0 kgf-m,
7.0 lb-ft)
!
The camshaft journal holder bolts are made
3
of a special material and much superior in
strength, compared with other types of high
strength bolts.
Take special care not to use other types of
I837H1140225-01
bolts instead of these special bolts.
A
A
B
holder thrust surfaces may result if the
camshaft journal holders are not drawn
down evenly.
journal holder bolts "F".
indicated on the camshaft journal holders.
CAUTION
4
"F"
B
I837H1140226-02
Cylinder
No. 1 and No. 2
No. 3 and No. 4
"F"
I837H1140227-01