Suzuki GSX-R600 Manual page 307

• Apply a small quantity of thread lock to the gearshift
cam stopper plate bolt (6) and tighten it to the
specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (b): 13 N·m (1.3
kgf-m, 9.5 lb-ft)
• Apply a small quantity of thread lock to the gearshift
arm stopper (7) and tighten it to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Gearshift arm stopper (c): 19 N·m (1.9 kgf-m, 13.5
lb-ft)
6
(b)
I837H1140167-02
7
(c)
I837H1140168-02
• Install the gearshift shaft assembly (8) and washers
(9) as shown.
NOTE
Pinch the gearshift arm stopper (7) with
return spring ends "D".
8
9
• Install the washer (10) and snap ring (11).
CAUTION
!
Never reuse a snap ring.
11
Oil Pump Drive Sprocket
• Install the thrust washer (1) to the countershaft.
NOTE
The chamfer side "A" of thrust washer
should face the crankcase side.
"A"
1
Engine Mechanical: 1D-67
"D"
7
I837H1140169-01
10
I837H1140170-01
I837H1140171-02