• Fill the reservoir with brake fluid to the upper mark of
the reservoir.
• Reinstall the reservoir tank.
Brake Fluid Replacement
CAUTION
!
Handle brake fluid with care: the fluid reacts
chemically with paint, plastic, rubber
materials, etc.
Front Brake
1) Place the motorcycle on a level surface and keep the
handlebars straight.
2) Remove the brake fluid reservoir cap and
diaphragm.
3) Suck up the old brake fluid as much as possible.
4) Fill the reservoir with new brake fluid.
BF: Brake fluid (DOT 4)
5) Connect a clear hose to the air bleeder valve and
insert the other end of the hose into a receptacle.
6) Loosen the air bleeder valve and pump the brake
lever until the old brake fluid flows out of the brake
system.
I837H1410012-02
B837H14106008
7) Close the air bleeder valve (1) and disconnect the
clear hose.
Tightening torque
Air bleeder valve (Front) (a): 7.5 N·m (0.75 kgf-
m, 5.5 lb-ft)
I837H1410013-01
Brake Control System and Diagnosis:
1
4A-7
I837H1410014-01
I837H1410015-01
(a)
I837H1410016-02