Suzuki GSX-R600 Manual page 443

11) Remove the damper rod bolt with the special tool.
Special tool
(C): 09940–30221 (Front fork assembling
tool)
12) Remove the inner rod/damper rod (cartridge) (9).
CAUTION
!
Do not disassemble the inner rod/damper rod
(cartridge).
13) Remove the outer tube from the inner tube.
(C)
I837H1220019-01
9
I837H1220020-02
I837H1220021-01
14) Remove the dust seal (10) and oil seal stopper ring
(11).
10
15) Remove the oil seal (12) with the special tool.
16) Remove the oil seal retainer (13).
Special tool
(D): 09913–50121 (Oil seal remover)
(D)
12
Assembly
Assemble the front fork in the reverse order of
disassembly. Pay attention to the following points:
Oil seal and dust seal
• Install the following parts onto the inner tube.
– Dust seal (1)
– Oil seal stopper ring (2)
– Oil seal (3)
– Oil seal retainer (4)
CAUTION
!
• The oil seal and dust seal must be replaced
with new ones when assembling front fork.
• When installing the oil seal to inner tube,
be careful not to damage the oil seal lip.
Front Suspension: 2B-6
11
I837H1220022-02
13
I837H1220023-02