Suzuki GSX-R600 Manual page 226

1B-14 Emission Control Devices:
9) Remove the rear fender (rear) plate (6) and rear
fender (rear) (7).
6
10) Remove the rear fender (front) cover (8).
8
11) Remove the battery rubber mat (9).
12) Remove the rear fender (front) mounting bolts.
13) Disconnect the surge hose (10).
7
14) Move the rear fender (front) backward.
I837H1120034-02
15) Disconnect the surge hose (11).
16) Remove the bracket (12) and fuel shaft-off valve
(13).
8
I837H1120035-02
Installation
Install the fuel shut-off valve in the reverse order of
removal. Pay attention to the following point:
9
• Install the fuel shut-off valve as shown in the EVAP
canister hose routing diagram. Refer to "EVAP
Canister Hose Routing Diagram (Only for E-33)
(Page 1B-6)".
• Insert the rear fender (front) cover hook "A" to the rear
fender (front). Refer to "Rear Fender Construction in
Section 9D (Page 9D-4)".
I837H1120036-02
I837H1120037-01
10
I837H1120038-02
13
12
11
I837H1120039-02
"A"
I837H1120040-01