Connecting The Projector To A Network; Connecting The Devices To The 3D Port - Christie CP2415-RGB Installation And Setup Manual

LEDs State
Solid
Yellow Flashes once per
second
Flashes three times
per second
Red Flashes three times
per second
Solid

Connecting the projector to a network

The Cinema 2K-RGB projectors can be connected to various media devices and wired networks.
For detailed information on connecting the projector to a device or network, see the CineLife+ User
Guide (P/N: 020-103073-XX).

Connecting the devices to the 3D port

For information on connecting devices to the 3D port on the projector, refer to the product
documentation for the device you are using.
Cinema 2K-RGB Installation and Setup Guide–CP2415-RGB and CP2420-RGB
020-103259-01 Rev. 1 (10-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
Description
Startup The power is on and the lamp is on or off
Notification A problem exists with the projector that does not
prevent it from operating.
Non-critical alarm A problem exists with the projector that does not
prevent it from operating.
Unacknowledged An error with the projector exists and has not
critical error been acknowledged.
Acknowledged critical An error with the projector exists and has been
error acknowledged.
32