Purchase Record And Service Contacts - Christie CP2000-XB Setup Manual

1 Introduction
This manual is intended for trained users authorized to operate professional high-brightness projection
systems. Only qualified Christie trained service technicians knowledgeable about all potential hazards
associated with high voltage, ultraviolet exposure and high temperatures generated by the lamp and
associated circuits are authorized to 1) assemble/install the projector and 2) perform service functions
inside the projector.
1.1

Purchase Record and Service Contacts

Should a problem be encountered with any part of the projector, contact a dealer. If you have
purchased the projector, complete the Purchase Record, below and keep with your records.
Table 1.1 Purchase Record
Dealer:
Dealer Phone Number:
Projection Head Serial Number:
Ballast Serial Number:
Purchase Date:
Installation Date:
NOTE: Both serial numbers are located at the rear of the projector.
Table 1.2 Ethernet Settings
Default Gateway:
DNS Server:
CP2000-XB Projector Address
Projector:
Subnet Mask:
CP2000-XB Setup Guide
020-100250-02 Rev. 1 (06-2009)
1-1