Purchase Record And Service Contacts - Christie CP2000-SB Setup Manual

1 Introduction
This manual is intended for trained users authorized to operate professional high-brightness projection
systems. Only qualified Christie trained service technicians knowledgeable about all potential hazards
associated with high voltage, ultraviolet exposure and high temperatures generated by the lamp and
associated circuits are authorized to 1) assemble/install the projector and 2) perform service functions
inside the projector.
1.1

Purchase Record and Service Contacts

Should a problem be encountered with any part of the projector, contact a dealer. If you have
purchased the projector, complete the Purchase Record, below and keep with your records.
Table 1.1 Purchase Record
Dealer Phone Number:
Pedestal and Head Serial Numbers*:
NOTE: Both serial numbers are located at the rear of the projector.
Table 1.2 Ethernet Settings
Touch Panel Controller Device:
CP2000-SB Setup Guide
020-100249-02 Rev. 1 (05-2009)
Dealer:
Purchase Date:
Installation Date:
Default Gateway:
DNS Server:
CP2000-SB Projector Address:
Projector:
Subnet Mask:
Touch Panel Controller Address:
Subnet Mask:
1-1