Specifications; Optional Equipment; Setup - Toro Multi-Pro 1200 Operator's Manual

Specifications

Note: Specifications and design are subject to change
without notice.
Base weight
Weight with standard spray
system, empty, without
operator
Weight with standard spray
system, full, without operator
Maximum gross vehicle
weight (GVW)
(on level ground)
Tank capacity
Overall width without
standard spray system

Setup

Note: Determine the left and right sides of the machine from the normal operating position.
To use the sprayer, you must obtain and install a boom kit and nozzles. Contact your Authorized Toro Distributor for
information on the available boom kits and accessories. After you install your booms and nozzles and before using the
sprayer for the first time, adjust the boom bypass valves so that the pressure and application rate remains the same for all
booms when you turn one or more booms off. Refer to Adjusting the Boom Bypass valves, page 22.
Without a boom kit installed, the sprayer may spray chemicals out of the boom valves, possibly
injuring bystanders or causing property damage.
Do not run the sprayer without a boom kit and nozzles installed.
All manuals and user guides at all-guides.com
1260 lb (571.5 kg)
1630 lb (739 kg)
3100 lb (1406 kg)
3500 lb (1587.6 kg)

Optional Equipment

160 US gallons
The Toro Company has optional equipment and accessories
(605.6 L)
that you can purchase separately and install on your
sprayer. Contact your Authorized Service Dealer for a
56 inches (142 cm)
complete list of optional equipment that is currently
available for your sprayer.
Caution
10
Overall length with standard
spray system
Overall height with standard
spray system to the top of
the tank
Overall height with standard
spray system to the top of
the booms stored in the X
pattern
Ground clearance
Wheel base
120 inches (305 cm)
43 inches (109 cm)
74 inches (188 cm)
4.5 inches (11.4 cm)
62 inches (157 cm)