Power supply
Figure 25: Connecting the power cables
Ê Connect the two power cables to the system board connectors "PC98" and
"PWR1".
6.2.1.4
Concluding steps
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
"Resuming BitLocker functionality" on page 84
Ê
"Performing a fan test after replacing a defective fan" on page 89
Ê
V
CAUTION!
(Except for Japanese market) After replacing the power supply unit a fan
calibration must be started for the PSU fan. You will find the description
for this procedure in the manual "ServerStart".
96
Upgrade and Maintenance Manual
RX1330 M1