Tools You Need At Hand - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

2.3

Tools you need at hand

When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver/
bit insert
Phillips
PH2 / (+) No. 2
Phillips
PH2 / (+) No. 2
Phillips
PH2 / (+) No. 2
Torx Plus 6
Phillips
PH1 / (+) No. 1
Special bit insert
Table 2: List of used screws (not applicable for the Japanese market)
RX1330 M1
Screw
Upgrade and Maintenance Manual
Usage Type
M3 x 3.5 mm
(silver)
Slot brackets
C26192-Y10-C151
M3 x 4.5 mm
SAS expander
(silver)
board
C26192-Y10-C67
M3 x 6 mm
System board,
(silver)
front panel
C26192-Y10-C68
M2 x 4 mm
(black)
ODD latch
C26192-Y10-C166
Front VGA M3 x 3.5 mm
(silver)
C26192-Y10-C102
REM 3 x 15 mm
(black)
TPM screw
C26192-Y10-C176
Before you start
27