Removing The Irmc Microsd Card; Preliminary Steps - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

14.5.2 Removing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers

14.5.2.1 Preliminary steps

"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
Ê Remove the riser module 1 as described in section
module" on page
14.5.2.2 Removing the iRMC microSD card
Figure 202: Removing the iRMC microSD card
Ê To eject the iRMC microSD card, gently push it in and then let go (1).
Ê Pull the iRMC microSD card straight out of its slot (2).
RX1330 M1
58.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing a riser
273