Figure 74: Connecting power cable to the HDD backplane
Ê Connect the power cable to the HDD backplane.
7.2.9.6
Concluding steps
Ê Insert all HDD/SSD modules, see section
modules" on page
I
Make sure that you reinstall the HDD/SSD module in the bay it was
located before the HDD backplane replacement.
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
RX1330 M1
120.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
"Installing 2.5-inch HDD/SSD
137