Inch Hdd/Ssd Configurations; Equipping The 2.5-Inch Hdd/Ssd Bays; Configuration With Up To Four Hdd/Ssd Modules - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

7.2

2.5-inch HDD/SSD configurations

7.2.1

Equipping the 2.5-inch HDD/SSD bays

– Solid state drives (SSDs) are always equipped before installing hard disk
drives.
– If only one HDD/SSD module is installed, the HDD/SSD module will be
installed in position 1. Free bays must be equipped with a dummy module.
7.2.2

Configuration with up to four HDD/SSD modules

Mounting order
Figure 48: Mounting order with up to four 2.5-inch HDDs/SSDs
HDD/SSD naming scheme
Figure 49: Naming scheme with up to four 2.5-inch HDDs/SSDs
I
The HDD/SSD numbering as listed in the ServerView RAID Manager
differs from the HDD mounting order:
Position Logical drive number ServerView RAID Manager display name
[1]
[2]
[3]
[4]
RX1330 M1
0 HDD vendor name (0)
1 HDD vendor name (1)
2 HDD vendor name (2)
3 HDD vendor name (3)
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
117