Replacing The Sas Expander Board; Preliminary Steps; Removing The Defective Sas Expander Board; Installing The New Sas Expander Board - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives

7.2.10 Replacing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver

7.2.10.1 Preliminary steps

"Locating the defective server" on page 43
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê

7.2.10.2 Removing the defective SAS expander board

Ê Remove the SAS expander board as described in section
SAS expander board" on page

7.2.10.3 Installing the new SAS expander board

Ê Install the SAS expander board as described in section
expander board" on page

7.2.10.4 Concluding steps

"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
138
132.
135.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the
"Installing the SAS
RX1330 M1