Preparing The Fbu - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.2.2

Preparing the FBU

Figure 128: Installing the FBU in the holder (A)
Ê At a slight angle, fit the FBU under both retaining brackets of the holder.
Ê Push in the FBU until it locks in place.
Figure 129: Installing the FBU in the holder (B)
Ê Ensure that the FBU is properly seated in the holder as shown.
Upgrade and Maintenance Manual 193
RX1330 M1