Hard disk drives / solid state drives
7.2.5
Installing 2.5-inch HDD/SSD modules
Customer Replaceable Unit
(CRU)
Tools: tool-less
7.2.5.1
Preliminary steps
Ê Locate the correct drive bay as described in section
configurations" on page
7.2.5.2
Removing a 2.5-inch HDD/SSD dummy module
I
In configuration with only one 4 x 2.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no HDD
backplane behind.
Figure 54: Removing dummy lock
Ê Only valid after upgrading the server with the second HDD backplane: pull
the dummy lock out of the dummy cover. Please be aware that the dummy
lock can be damaged.
120
117.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"2.5-inch HDD/SSD
RX1330 M1