Optical disk drive
12.2.3 Installing the ODD
Ê If no ODD has been installed before:
Ê Remove the ODD latch from its package (see figure 155) or
Ê Remove the two screws and take the ODD latch from the fan bridge (see
figure 156).
Figure 158: Installing the ODD latch on the ODD
Ê Fasten the ODD latch with two screws to the rear side of the ODD.
Figure 159: Installing the ODD
Ê Push the ODD into the bay (1) simultaneously pressing the front of the ODD
slightly down until the ODD latch engages (2).
228
Upgrade and Maintenance Manual
RX1330 M1