Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual page 37

Modules with Electrostatic-Sensitive Devices
Modules with electrostatic-sensitive devices are identified by the following
sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must always observe the
following points:
Switch off the system and remove the power plugs from the power outlets
●
before installing or removing components with ESDs.
You must always discharge static build-up (e.g. by touching a grounded
●
object) before working with such components.
Any devices or tools that are used must be free of electrostatic charge.
●
Wear a suitable grounding cable that connects you to the external chassis
●
of the system unit.
Always hold components with ESDs at the edges or at the points marked
●
green (touch points).
Do not touch any connectors or conduction paths on an ESD.
●
Place all the components on a pad which is free of electrostatic charge.
●
I
For a detailed description of how to handle ESD components, see the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
RX1330 M1
Upgrade and Maintenance Manual
Important information
37