Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual page 190

Expansion cards and backup units
Ê Install a RAID controller as described in section
card" on page
Figure 126: Connecting the BBU cable to the RAID controller
Ê Connect the BBU cable to the RAID controller.
V
CAUTION!
Make sure that the connector side with the three dots is on the top.
●
Otherwise you risk short-circuits.
Do not connect the cable using excessive force, the connector is
●
weak.
190
170.
Upgrade and Maintenance Manual
"Installing an expansion
RX1330 M1