Table of Contents
Advertisement
Power supply
6.3.2.1
Preliminary steps
No steps needed.
6.3.2.2
Removing a hot-plug power supply unit
Ê Remove the power cord from the dedicated power supply unit as described
in section
"Disconnecting the server from the mains" on page
Figure 34: Unlocking and removing the hot-plug power supply unit
Ê Push the handle of the power supply unit halfway upward in the direction of
the arrow (1).
Ê Push the lock in direction of the arrow (2).
Ê Grip the handle and pull out the power supply unit in the direction of the
arrow (3).
V
CAUTION!
Never leave the bay for the power supply unit empty for more than two
minutes during operation. Otherwise, excessive temperatures could
damage system components.
102
Upgrade and Maintenance Manual
46.
RX1330 M1
Advertisement
Table of Contents
