Installing The Fbu - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 130: Connecting the FBU adapter cable to the FBU
Ê Connect the cable end on the FBU to the FBU adapter cable as shown.
9.5.2.3

Installing the FBU

Ê Install the FBU with the holder as described in section
on page 189.
Ê If applicable, install the TFM as described in section
on page 180.
Ê Connect the FBU adapter cable to the TFM as described in section
"Installing the new TFM" on page
Ê Install the RAID controller with the TFM as described in section
expansion card" on page
194
180.
170.
Upgrade and Maintenance Manual
"Installing the BBU"
"Installing the new TFM"
"Installing an
RX1330 M1