Replacing The Ufm; Preliminary Steps; Removing The Defective Ufm - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

"Switching on the server" on page 57
Ê
"Resuming BitLocker functionality" on page 84
Ê

14.3.3 Replacing the UFM

Field Replaceable Unit
(FRU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers

14.3.3.1 Preliminary steps

"Locating the defective server" on page 43
Ê
"Disabling SVOM boot watchdog functionality" on page 64
Ê
"Suspending BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
Ê Remove the riser module 3 as described in section
module" on page

14.3.3.2 Removing the defective UFM

Ê Remove the UFM as described in section
page 257.
Ê The UFM spacer remains on the system board.
RX1330 M1
58.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
Software: 5 minutes
"Removing a riser
"Removing the UFM" on
259