Installing The Odd; Preliminary Steps; Removing The Dummy Cover - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

12.2

Installing the ODD

Upgrade and Repair Unit
(URU)
Tools: Torx Plus 6 screw driver

12.2.1 Preliminary steps

"Suspending BitLocker functionality" on page 63
Ê
"Shutting down the server" on page 45
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê

12.2.2 Removing the dummy cover

Figure 157: Removing the dummy cover
Ê Pull the dummy cover out of the bay.
V
CAUTION!
Keep the dummy cover for future use. If you remove the accessible drive
again and do not replace it with a new one, the dummy cover must be
reinstalled to comply with EMC regulations and to satisfy cooling
requirements and fire protection measures.
RX1330 M1
Upgrade and Maintenance Manual
Optical disk drive
Hardware: 5 minutes
227