Defaults Register 2 - Motorola MVME1X7P Programmer's Reference Manual

MCECC Functions
4

Defaults Register 2

ADR/SIZ
BIT 31
NAME 0
OPER R/W
RESET 0 PLS
4-32
being set. The state of FSTRD after a reset (power-up,
soft, or local) is determined by board-level configuration
resistors.
RWB6 Read/Write Bit 6 is a general-purpose read/write bit.
RWB7 Read/Write Bit 7 is a general-purpose read/write bit.
1st $FFF43078/2nd $FFF43178 (8-bits)
30 29
0 0
R/W R/W
0 PLS 0 PLS
It is not recommended that non-test software write to this register.
RESST2-RESST0
These general-purpose read/write bits are initialized by a
power-up, soft, or local reset to match the RESST2-
RESST0 bits from the reset serial bit stream.
28 27 26
0 0 RESST2 RESST1 RESST0
R/W R/W R/W
V PLS V PLS V PLS
Computer Group Literature Center Web Site
25 24
R/W R/W
V PLS V PLS