Local Bus Interrupter Enable Register (Bits 8-15) - Motorola MVME1X7P Programmer's Reference Manual

Local Bus Interrupter Enable Register (bits 8-15)

ADR/SIZ
BIT
15
NAME ESW7
OPER R/W
RESET
0 PSL
This is the local bus interrupter enable register. When an enable bit is high,
the corresponding interrupt is enabled. When an enable bit is low, the
corresponding interrupt is disabled. The enable bit does not clear
edge-sensitive interrupts or prevent the flip-flop from being set. If
necessary, edge-sensitive interrupters should be cleared to remove any old
interrupts and then re-enabled.
ESW0
ESW1
ESW2
ESW3
ESW4
ESW5
ESW6
ESW7
http://www.motorola.com/computer/literature
$FFF4006C (8 bits of 32)
14 13 12
ESW6 ESW5 ESW4
R/W R/W R/W
0 PSL 0 PSL 0 PSL
Enable software 0 interrupt.
Enable software 1 interrupt.
Enable software 2 interrupt.
Enable software 3 interrupt.
Enable software 4 interrupt.
Enable software 5 interrupt.
Enable software 6 interrupt.
Enable software 7 interrupt.
LCSR Programming Model
11 10 9
ESW3 ESW2 ESW1
R/W R/W R/W
0 PSL 0 PSL 0 PSL
2
8
ESW0
R/W
0 PSL
2-83