8-142
Lighting Systems
1
3
282917
Body and Accessories
Installation Procedure
1. Install the bulb to the socket.
2. Connect the harness socket to the HVAC control.
3. Cconnect the HVAC bulb jumper connector (2).
(
4. Install the HVAC control. Refer to
Control.
Assembly Replacement in HVAC Systems
With AC
0
Manual
Courtesy Lamp Replacement -
Rear Quarter
Removal Procedure
1. Remove the rear courtesy lamp from the quarter
trim finishing panel.
2. Disconnect the electrical connector from the
courtesy lamp.
Installation Procedure
1 . Connect the electrical connector to the
courtesy lamp.
2. Install the rear courtesy lamp to the quarter trim
finishing panel.
Trans Fir Shift Control Indicator Lamp
Replacement
Removal Procedure
1 . Remove the front floor console transmission
opening trim plate.
2. Remove the bulb and socket from the front floor
console transmission opening trim plate.
3. Remove the bulb from the socket.
Installation Procedure
1. Install the bulb to the socket.
2. Install the bulb and socket to the front floor
console transmission opening trim plate.
3. Install the front floor console transmission opening
trim plate.
Snap the trim plate in place to secure the
trim plate.
(