GMC Chevrolet Camaro 1998 Service Manual page 764

8-522 lnstru111ent Panel, Gauges and Console
296134
1
296134
Body· and Accessories
7. Remove the floor console bolts (1).
8.
Raise the park brake handle as far as possible.
If the park brake handle cannot be pulled up far
enough to remove the console, perform the (
following: .
• Release the park brake handle
• Hold t.he adjuster pawl disengaged
Then park brake handle can be pulled up
further.
9.
Disconnect the power outlet connector.
10.
Remove the floor console
(2)
from the vehicle.
Installation Procedure
1. Install the console (2) to the vehicle.
2.
Connect the power outlet connector.
3. Release the park brake handle.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the floor console bolts (1 ).
Tighten
Tighten the floor console bolts (1) to
8 N-m (71 lb in).
5. Install the console trim plate.
6. Install the shift lever knob to the shift lever.
7. Install the shift control knob.
(
(