GMC Chevrolet Camaro 1998 Service Manual page 161

)
HVAC
3. Install the J 33023-A to the front head.
4. Install the J 33020
into the inner circle of slots in
the rotor.
5. Turn the J 33020 clockwise in the slots in order to
engage the tangs of the puller with the segments
between the slots in the rotor.
6. Hold the J 33020 in place. Tighten the puller
screw against the puller guide in order to
remove the puller rotor and bearing assembly.
7. Mark the location of the clutch coil terminal (1) on
the compressor front head.
8. Install the J 33023-A on the front head of the
compressor.
9. Install the J 8433-1 and the J 8433-3
with the
J 33025 on the front head of the compressor.
10. Tighten the J 8433-3 against the J 33023-A in
order to remove the clutch coil (2).
HVAC System - Manual 1-51
J33023-A
237120
237121
J 8433-1 J 8433-3
1
J 33023-A
237123