GMC Chevrolet Camaro 1998 Service Manual page 347

)
)
Body and Accessories
4. Pull the headlamp forward to access electrical
connectors.
5.
Disconnect the electrical connectors from the
headlamp.
6. Remove the headlamp.
Installation Procedure
1. Perform the following to install the headlamp:
1.1. Connect the electrical connector to the
headlamp.
1.2. Engage tabs on back of headlamp into the
slots in the headlamp bracket.
Notice:
Refer to Fastener Notice in Cautions and
Notices.
2.
Install the headlamp housing bracket bolt attaching
the headlamp to the headlamp bracket.
Tighten
Tighten the headlamp housing bracket bolt to
7 N-m (62 lb in).
Lighting Systems 8-105
294726
294726
294727