Headlamps Inoperative - Low Beams (Scandanavia); Headlamps Inoperative - High Beams - GMC Chevrolet Camaro 1998 Service Manual

8-88 Lighting Systems
Body and Accessories
Headlamps Inoperative - Low Beams (Scandanavia)
Step Action Value(s)
Yes No
1
Was the entire DRL system check performed? Go to DRL
-
Go to Step 2 System Check
1. Ensure that the headlamps are on.
2. Turn the headlamp dimmer switch to the low beam
2
position.
-
3.
Connect a test light from the headlamp dimmer
switch connector terminal B to gro~nd.
Does the test light illuminate?
Go to Step 3 Go to Step 4
Connect a test light at the headlamp dimmer switch
3
connector terminal C and ground.
-
Does the test light illuminate? Go to Step 5 Go to Step 6
Connect a test light between the headlamp switch
4
connector terminal E and ground.
-
Does the test light illuminate? Go to Step B Go to Step 9
5
Repair a poor connection or open in circuit 12.
-
-
Is the repair complete? Go to Step 7
6
Replace the headlamp dimmer switch.
-
-
Is the repair complete? Go to Step 7
1. Turn the ignition switch to the OFF position.
7
2. Reconnect all connectors/components removed.
-
Go to DRL
-
Have all repairs been made? System Check
8
Repair a poor connection or open in circuit 10.
-
-
Is the repair complete?
Go to Step 7
Connect a test light between the headlamp switch
9
connector terminal
J
and ground.
-
(
\
Does the test light illuminate?
Go to Step 10 Go to Step 11
Replace the headlamp switch. Refer to Headlamp Switch
10
Replacement (Chevrolet) Headlamp Switch Replacement
(Pontiac)
-
-
Is the repair complete? Go to Step 7
11
Repair a poor connection or open in circuit 702.
-
-
Is the repair complete?
Go to Step 7
Headlamps Inoperative - High Beams
Step Action Value(s) Yes
No
1
Was the entire Headlight System Check performed?
-
Go to Headlight
Go to Step 2 System Check
Do the low beam headlights operate properly? Go to
Headlamps
Inoperative -
Low Beams
(Chevrolet)
2
-
Headlamps
Inoperative - Low
Beams (Pontiac)
Headlamps
Inoperative -
Low Beams
Go to Step 3 (Scandanavia)
1. Turn the headlamp switch to the HEAD position.
3
2. Turn the headlamp dimmer switch to the HIGH
-
position.
Does the high beam indicator light?
Go to Step 4 Go to Step 5