GMC Chevrolet Camaro 1998 Service Manual page 868

a.:&26 Cruise Control
296582
2
3
(ti
296577
1 2
4
3
(ti
296577
Body and Accessories
11 . Remove the retainer from the cruise control
module.
Compress the conduit tangs.
12. Pull the cruise control cable (4) out from,th&··
module (2).
13. Disconnect the cable bead (1) from the ribbon (3)
14. Remove the cruise control cable from the
vehicle.
Installation Procedure •
Without Traction Control
1. Install the cruise control cable to the vehicle.
2. Inspect the cable end to insure the 0-ring is
in place.
3. Connect the cable bead (1) to the ribbon (3)
4. Remove the shipping retainer.
Important: Cruise control module ribbon must not be
twisted.
5. Pull the engine end of the cruise control cable
until the cable is taut.
6. Install the conduit fitting over the ribbon and snap
cable end into the module.
Ensure that both tangs are engaged.
(
(
(