HVAC
Important: Securely hand-tighten the handle of the
J 23128-A. Do not use a wrench or pliers.
6. Fully engage the knurled tangs of the J 23128-A
into the recessed portion of the seal by turning
the handle clockwise.
7. Remove the seal from the compressor using a
rotary-pulling motion. Discard the seal.
8. Remove the seal 0-ring from the compressor
neck using the J 9553-01. Discard the seal 0-ring.
9. Inspect the shaft and the inside of the compressor
neck again for dirt and foreign material.
10.
Ensure that the shaft and the inside of the
compressor neck are perfectly clean prior to
installing new parts.
HVAC System - Manual
1-55
210205
J
9553-01
237127