Park/Turn Signal Lamp Replacement (Pontiac Trans Am) - GMC Chevrolet Camaro 1998 Service Manual

8-:128 Lighting Systems
~ 2
I
294763
~ 2
I
294763
366720
Body and Accessories
Park/Turn Signal Lamp Replacement
(Pontiac Firebird)
Removal Procedure
1 . Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Open the access door in the front bumper air
deflector.
3. Disconnect the electrical connector from the park
and turn signal lamp.
4.
Remove the park and turn signal lamp nuts.
5. Remove the park and turn signal lamp (2) from
the fascia.
Installation Procedure
1. Install the park and turn signal lamp (2) to the
fascia.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the park and turn signal lamp bolts.
Tighten
Tighten the park and turn signal lamp nuts to
4 N·m (35 lb in).
3. Connect the electrical connector to the park and
turn signal lamp.
4. Close the access door in the front bumper air
deflector.
5. Lower the vehicle.
Park/Turn Signal Lamp Replacement
(Pontiac Trans Am)
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
2. Open the access door in the front bumper air
deflector.
3. Disconnect the electrical connector from the park
and turn signal lamp.
4. Remove the park and turn signal lamp bolts.
5. Remove the park and turn signal lamp from the
fascia.
(
(