Evaporator Core Replacement - GMC Chevrolet Camaro 1998 Service Manual

)
HVAC
6. Inspect the bl0,wer motor fan for damage and
distortion.
Perform the following tasks as necessary:
) • Repair the blower motor fan.
• Replace the blower motor fan:
Installation Procedure
Notice: Refer to Fastener Notice in: Cautions and
Notices. · ·
1. Install the b.lower rn6tor (3) using the.
following steps: ' · ·.
1.1. Guide the blower motor (3) into position.
Do not catch. the !:>,lower motor fa.n on the
protruding parts. . .
1.2. Install the blower motor bolts (2).
Tighten . .
Tighten the blower motor bolts (2) to
2.3 N·m (20 lb in).
2. Install the right instrument panel insulator. Refer
to Insulator Replacement - ·lP (Right Side) in
Instrument Panel, Gauges and Console.
3. Check the blower for proper operation.
Evaporator Core Replacement
Removal Procedure
1 . Drain the engine coolant. Refer. to Draining and
Filling Cooling System (V6) or Draining and
Filling Cooling System (VB) in Engine Cooling.
2. Recover the refrigerant. Refer to Refrigerant
Recovery and Recharging.
3. Remove the heater core. Refer to Heater Core
Replacement.
4. Remove the temperature control cable bolt.
5. Remove the temperature control cable from the
module.
HVAC System - Manual 1-93
1
282924
282922