Fixed Antenna Replacement; Power Antenna Mast R~Placement - GMC Chevrolet Camaro 1998 Service Manual

9..;254 Entertainment
5
296686
1
2
5
3
Body ·and . . Accessories
Fixed Antenna Replacement
Removal Procedure
,,
1 . Remove the mast antenna. Refer to Fixed
Antenna Mast Replacement.
2. Remove the quarter inner rear trim finishing panel.
3. Remove the spare tire and the jack.
4. Remove the antenna cable (3) from the antenna
bracket (4).
5. Remove the antenna bracket bolt (5).
6. Pull down the antenna bracket (4) from the
antenna bezel (2). Disengage the bracket.
7. Remove the antenna bracket (4).
8. Unsnap the bezel (2) from the rear quarter panel.
9. Remove the antenna bezel (2).
Installation Procedure
1. Snap the bezel (2) into the rear quarter panel by
aligning the bezel.
2. Install the' antenna bezel (2):
3. Install the antenna bracket ~4).
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the antenna bracket bolt (5).
Tighten
Tighten the antenna bolt (5) to 5 N·m (44 lb in).
5. Install the antenna cable (3) to the antenna
bracket (4).
11-----+---;.--r-=- - - - - 4 6. Install the spare tire and the jack.
296686
~ 1
296688
7. Install the quarter inner rear trim finishing panel.
8. Install the mast antenna. Refer to Fixed Antenna
Mast Replacement.
Power Antenna Mast Replacement
Removal Procedure
1. Turn the ignition switch to the ON position.
2. Turn the radio ON.
Important: Note the orientation of the serrated side of
the plastic cable in order to install the cable correctly.
3. Remove the antenna mast (3) and the contact
spring(2}. ·
4. Use contact cleaner in order to clean the contact
spring (2).
(
(