Cruise Release Switch Adjustment - GMC Chevrolet Camaro 1998 Service Manual

- ~
Body, and· Accessories
Cruise Release Switch Adjustment
Adjust the release switch (1) at the same time the
stoplamp and torque converter clutch (TCC) is.
adjusted. ·
Use the following procedure in order to adjust the
cruise control switch: --
1 . Depress the brake pedal or the c.lutch pedal.
Insert the switch into the pedal bracket until
the retainer is fully seated on the switch: ·
1.1 . The release switch {1)
• c
1.2. The stoplamp and TCC switch
1.3. The clutch switch or the clutch anticipate
· sw\tch ·. · ·
2. Slowly pull the brake or clutch pedal rearward
with a force of 222 N-m (50 lb) until click sounds
are not heard.
The switch retainers will be in their original
positions.
3. Ensure that the following contacts. open at
25.4 mm (1 in) or les,s of pedal travel:
3.1. The release switch (1)
3.2. The stoplamp.
and
TCC swjtc:h
4. Ensure that the switches open sjmultaneously or
before the onset of braking. ···· , · · • · ·
'The brake pedal may travel up to 25>.4.mm (1 in)
before the cruise control system disengages.
Cruise Control 8-635
296589