GMC Chevrolet Camaro 1998 Service Manual page 892

8·650 Exterior Trim
40mm·
(1.6")
1
2
369038
369045
369046
Body and · Accessories
4; Align the emblem to the tape guideline and press
firmly in place.
Molding/Nameplate Replacement •
Exterior Trim (Trans Am Door Emblem) ' '
Removal Procedure
t.
Mark the position of the, emblem with a length of
masking tape.
2. Remove the old emblem from the door. ·
3. Wash ,the doorwith·soapy water and wipe dty.
(
4. Remove all traces of adhesive from the. door using (
a oil-free naptha.or alcohol.. \
Installation Procedure
1 . Remove the backing paper from the emblem.
2. Measure 40.0 mm (.1.6 in) from the front edge of
the door to the tront edge of the emblem (2),
3. Measure 14.0 mm (0.55 in) from the totD edge of
the emblem (2) to the bottom edge of the
molding (1 ).
(